
![]() |
Studies have shown that over 40% of a typical home's annual energy budget is consumed by windows and doors. ENERGY STAR labeled windows and doors are twice as efficient as those manufactured just ten years ago, and 40% more efficient than products manufactured using common building code guidelines.* |
![]() |
Impact Resistant Window Replacement Florida - Energy Savings that add upDouble-Glazed with Low-Solar-Gain Low-E Glass(Spectrally Selective) These Low-E products are often referred to as sputtered (or soft-coat) due to the glass coating process. This type of Low-E product, sometimes called spectrally selective Low-E glass, reduces heat loss in winter but also reduces heat gain in summer. Compared to most tinted and reflective glazings, this Low-E glass provides a higher level of visible light transmission for a given amount of solar heat reduction. |
| Low solar gain Low-E glazings are ideal for buildings located in cooling-dominated climates.* | |

Cooling Season Savings
In climates that mainly require cooling, windows have represented a major source of unwanted heat gain. In recent years, windows have undergone a technological revolution. It is now possible to significantly reduce solar heat gain and improve comfort while providing clear views and daylight. The graph below illustrates the significant savings in cooling season costs associated with improved windows for a house in a cooling-dominated climate. In warm regions, this means that high performance windows can face into the sun if desired without great energy penalties -- although shading techniques remain important.*
• Lifetime Limited warranty on the frame and operating parts
Product testing was performed by an independent testing firm in Pennsylvania using air cannons. In the tests, a two-by-four piece of lumber, nine-feet long, weighing nine pounds, was shot at specific and varying parts of units at a rate of 50-feet per second. After the impacts, the units were then subjected to 9,000 cycles of combined positive and negative pressure. To pass the test, each unit subjected to these conditions needed to continue to function. The glass must stay intact in the sash, and Double Hung and Casement windows must be operable.